Skip to content
Customize

2 free starting plans

Loafing shed plans

A loafing shed is a roof on three walls that cattle or horses walk in and out of. Two free plans: the 12x16, 192 sq ft, and the 16x24, 384 sq ft, with posts set deeper and braced on the open side, and materials from $4,700. The designer changes the size, so a 12x24 is one edit away.

A red 30x48 pole barn with white trim and a white steel roof, two large sliding doors on the gable end, hay bales on the gravel yardIllustration
Plans
2
Floor, sq ft
192 to 384
Materials, about
$4,700 to $7,000
Preliminary checks
All passed at 30 psf

Every size, drawn by the designer

Pick a loafing shed size.

Each one is a full starting plan: framed, checked for 30 psf of ground snow, 115 mph of wind and a 36 in frost line, and priced. Switch the view to see the frame or the dimensions.

The 16x24 open-front pole shed, one of the loafing shed plans, drawn by the designerThe 16x24 open-front pole shed, one of the loafing shed plans, framing view, drawn by the designerThe 16x24 open-front pole shed, one of the loafing shed plans, dimensions view, drawn by the designerDrawn by the designer from this plan

16x24

16x24 open-front pole shed

A pole shed with three closed walls and the front open, for a tractor, a trailer or a hay stack. Three 8 ft bays on an 8 ft eave.

Floor
384 sq ft
Eave
8'
Front
Open
Posts
9, 6x6
Trusses
4 at 8', 16' span
Bays
3 of 8'

Preliminary checks passed for the loads you entered. Local approval not checked. 4 items for your builder or engineer: window jack studs on the girts, post foundation in uplift, post tops dry when bolted, diaphragm, shear walls and post embedment.

Materials about $7,000, before tax and delivery

What it needs

What a loafing shed has to do.

How many animals it covers, what the open side asks of the frame, and the height under it. The charts give each plan's side of the comparison.

  1. 01Space

    75 to 100 sq ft of floor for each beef cow.

    University of New Hampshire Cooperative Extension's livestock housing table gives 75 to 100 sq ft of enclosed housing for each beef cow, and names an open-front, three-sided barn as the housing type. At that range the 12x16 (192 sq ft) covers 1 to 2 cows and the 16x24 (384 sq ft) covers 3 to 5.

    That is the floor under the roof, not a stocking rate for your pasture. For a bigger herd, make the shed longer in the designer, or see the cattle barn plans, and ask your county extension office for the figure that fits your herd.

    • 12x16192 sq ft, 1 to 2 cows
    • 16x24384 sq ft, 3 to 5 cows
  2. 02Open side

    Three walls, the open face away from the wind.

    Turn the open face away from the wind that brings the bad weather, and anchor the building: a shed with one wall missing gives the wind more to work with. Take a wall away and the posts on that side stand alone under the roof, so the designer sets them 24 in deeper (6' in the ground on the 16x24, against 4' on the closed walls) and adds a knee brace.

    The designer draws gable roofs, not a single slope. Many loafing sheds you see in photos are single-slope; use our size, siting and cost as a guide and have a truss maker or an engineer design that roof. The run-in shed guide covers siting and the open front in full, for horses.

  3. 03Height

    An 8' eave, measured at the wall.

    Both plans use an 8' eave. Clear height is lowest at the bottom chord of the truss and the knee braces on the open side, not at the peak, and a cow with a calf, a bull or a loader raised needs more. Raise the eave in the designer, which takes 8' to 16', and the plan is redrawn and repriced.

  4. 04Snow and wind

    No checked part past 95% of its limit.

    As drawn, each plan is checked for 30 psf of ground snow, 115 mph of wind and a 36 in frost line. The bar is the most any checked member or connection on that plan uses of its limit, and every one stays at 95% or less; past that, the designer moves the purlins closer or goes up a size. The highest here is the 12x16: truss-to-post bolts, wind uplift, 3 x 1/2 in through-bolts, 92%.

    In the designer you enter your own loads, 20 to 70 psf of snow and 105 to 140 mph of wind. Past 30 psf the truss maker designs the trusses for your load; past 115 mph the posts, bracing and uplift need a second look. These are preliminary checks for the loads you entered; local approval is not checked, so ask your building department what it needs.

  5. 05Permit

    The 200 sq ft line is where the conversation starts.

    The model International Residential Code, section R105.2 in the 2021 edition, exempts one-story detached accessory structures from a building permit when the floor area is 200 sq ft or less (Grant County, Washington, reprinting IRC 2021 R105). In this group the 12x16 (192 sq ft) is under it; every other plan is over.

    That line is the building permit only: setbacks and height limits still apply, and a farm building may be treated differently from a garage. Ask your building department with the size and the post layout in hand; our plans run preliminary checks for the loads you enter, not local approval.

Side by side

Common loafing shed sizes compared.

2 of the 2 plans, from the smallest to the largest. Show all 2 for every size in between.

PlanFloorEaveFrontPostsTrussesMaterials, aboutLabor if hired, broad referenceBuild timeChecks
The 12x16 open-front pole shed plan, one of the loafing shed plans, drawn by the barn designer12x1612x16 open-front pole shed192 sq ft8'Open front73 at 8'$4,700$960 to $2,88045 to 65 hPassed, 4 for your builder
The 16x24 open-front pole shed plan, one of the loafing shed plans, drawn by the barn designer16x2416x24 open-front pole shed384 sq ft8'Open front94 at 8'$7,000$1,920 to $5,76065 to 90 hPassed, 4 for your builder

Each row is the starting plan as drawn, for 30 psf of ground snow, 115 mph of wind and a 36 in frost line. Materials are rounded: shelf prices plus the estimated trusses and concrete, before sales tax, delivery, labor and site work. Each plan page keeps the shelf prices, the estimate and the exact sum apart. Labor is the published range for hiring it out, a broad reference and not a quote; build time is total labor hours. Passed means the preliminary checks passed for those loads; local approval is not checked.

What they cost

About $4,700 to $7,000 in materials.

Each plan's materials list, priced line by line: shelf prices plus the trusses and a 4 in slab estimated from published ranges; take the slab out in the designer for a dirt floor. Hired labor is apart and only a broad reference from published price guides, not a quote; the table above has it plan by plan.

Lowest
$4,700, 12x16
Highest
$7,000, 16x24
Per sq ft of floor
$18.25 to $24.52
Labor if hired, broad reference
$960 to $5,760

Excluded: sales tax, delivery, permits, site work, engineering and equipment rental

The pole barn cost guide breaks it down by group, and the pole barn cost calculator runs the same numbers for your own size.

Materials for each loafing shed plan

The $79 builder's plan

Free to plan. $79 to build from.

Every plan above is free to open, check and price. The builder's plan is drawn from the barn you finish, for one payment. These are real sheets from the 39-sheet plan for the 30x40 pole barn.

Free

  • The design in 3D, and every change you make to it
  • Every preliminary check, with its rule and its source
  • The materials list priced line by line
  • A summary PDF of the design and its checks

$79 once

  • The post layout, every post dimensioned from one corner
  • Every wall framed: girts, headers and openings with heights
  • The truss order sheet to hand the truss maker
  • The roof frame and the steel, panel by panel
  • The cut list, the shopping list with store prices and the build, step by step
Customize the 16x24, free

You check out in the designer, with your design loaded. If the plan has an error, we fix it or refund you within 30 days. Guarantee terms.

Real sheets from the 39-sheet sample plan for the 30x40 pole barn

  • Sample sheet 1 of 39 from the plan for the 30x40 pole barn in our loafing shed plans: post layout

    01Post layout

  • Sample sheet 2 of 39 from the plan for the 30x40 pole barn in our loafing shed plans: wall framing

    02Wall framing

  • Sample sheet 5 of 39 from the plan for the 30x40 pole barn in our loafing shed plans: truss order sheet

    05Truss order sheet

  • Sample sheet 4 of 39 from the plan for the 30x40 pole barn in our loafing shed plans: shopping list

    04Shopping list

Sample sheets from the plan for the 30x40 pole barn in our loafing shed plans

Questions

Anything else? Write to us or read the questions about all plans.

Questions about loafing shed plans

About 75 to 100 sq ft of floor per beef cow, from the University of New Hampshire's extension table. At that range the 12x16 open-front shed (192 sq ft) covers 1 to 2 cows and the 16x24 (384 sq ft) covers 3 to 5. For more, make it longer in the designer, and ask your county extension office for the figure for your herd.

Open the 16x24 open-front pole shed in the designer and change the width to 12 ft: the plan is redrawn with its posts, trusses and a priced materials list, free. Our 12x16 starts at $4,700 in materials and the 16x24 at $7,000, before sales tax, delivery, labor and site work; a 12x24 falls between the two.

The building is the same: three walls, a roof and an open face. Loafing shed is the word for cattle, run-in shed the word for horses, who need a different floor area and a taller eave. Our 16x24 open-front pole shed serves either, and the run-in shed guide and the horse barn plans cover the horse side.

Away from the wind that brings the bad weather, which can differ from the prevailing wind, so watch your pasture in the next hard rain. Keep the ground high so water drains away from the open front, and anchor the building. The run-in shed guide has the siting rules and the post depth: 6' on the open side of the 16x24.

The materials for our 16x24 open-front pole shed come to about $7,000, before sales tax, delivery, labor and site work: $4,366 at shelf prices plus $2,640 for the trusses and the 4 in slab, estimated from published ranges. Hired labor adds $1,920 to $5,760, a broad reference, not a quote. For a shed for equipment, see the pole shed plans.

Other ways to browse

Not quite the barn you picture?

  • Pole shed plans: A small red pole shed with the front open on a riding mower and stacked firewood, a charcoal steel roof on wood posts, shown next to our loafing shed layoutsIllustration

    Pole shed plans

    Open fronts, open carports, lean-tos and big equipment sheds.

    9 plans

  • Horse barn plans: A red horse barn with white sliding doors open on the center aisle and the stall fronts, a paddock fence in front, shown next to our loafing shed layoutsIllustration

    Horse barn plans

    Box stalls 12 x 12 ft on a 12 ft center aisle.

    2 plans

  • Hay barn plans: The 30x48 hay barn, drawn by the barn designer, shown next to our loafing shed layoutsIllustration

    Hay barn plans

    Closed sides on a gravel floor, the baled hay each holds counted.

    2 plans

Your loads, your barn

Start from the 16x24. Make it yours.

Change the width, the length, the bays, the eave, the doors and your loads. The post size and depth, the purlins, the headers and the materials list follow every change. Free, no account.

Customize this design, free
Designing
Free
Builder's plan
$79 once
Account
Not needed
Inside a new building like the 16x24 in these loafing shed plans: trusses, girts and a workbench, the overhead door open on a fieldIllustration