Skip to content
Customize

2 free starting plans

Hay barn plans

2 free hay barn plans: the 30x48, about 54 tons of baled hay and the 40x60, about 96 tons of baled hay. Closed side walls and an open front, or open at both ends, so a tractor or loader drives in, on a 14' eave with a gravel floor. The designer counts what one free-standing stack holds and checks the frame for your snow and wind.

The 30x48 hay barn, one of our free hay barn plans, drawn by the barn designerIllustration
Plans
2
Floor, sq ft
1,440 to 2,400
Materials, about
$17,600 to $24,400
Preliminary checks
All passed at 30 psf

Every size, drawn by the designer

Pick a hay barn size.

Each one is a full starting plan: framed, checked for 30 psf of ground snow, 115 mph of wind and a 36 in frost line, and priced. Switch the view to see the frame or the dimensions.

The 30x48 hay barn, one of the hay barn plans, drawn by the designerThe 30x48 hay barn, one of the hay barn plans, framing view, drawn by the designerThe 30x48 hay barn, one of the hay barn plans, dimensions view, drawn by the designerDrawn by the designer from this plan

30x48

30x48 hay barn

Three closed walls and the front open, so a tractor backs in under the roof, on a gravel floor and a 14 ft eave. The planner counts the baled hay one free-standing stack holds, kept 2 ft off the walls and under the trusses.

Floor
1,440 sq ft
Eave
14'
Baled hay
about 54 tons
Posts
17, 4-2x8
Trusses
7 at 8', 30' span
Bays
6 of 8'

Preliminary checks passed for the loads you entered. Local approval not checked. 4 items for your builder or engineer: post foundation in uplift, post tops dry when bolted, diaphragm, shear walls and post embedment, bales against the walls.

Materials about $17,600, before tax and delivery

What it needs

What a hay barn has to hold.

The stack comes first, then the open ends and the eave. The charts give each plan's side of the comparison.

  1. 01What it holds

    About 250 cu ft of barn for each ton of baled hay.

    Extension guidance puts baled hay at about 250 cubic feet of storage per ton. The designer counts one solid stack kept 2 ft off the walls and 2 ft under the trusses: the 30x48 holds about 54 tons and the 40x60 about 96.

    Rows hold less. Leave 3' between rows for air, and 18 in between round bales stored one by one. Bale size and how tight they are baled change the count too, so weigh a few of your own bales before you buy hay by the ton.

  2. 02Walls and ends

    The stack stands free of the walls.

    The girts and wall posts are sized for wind, not for the side push of stacked bales, so the plan keeps the stack 2 ft off the walls. To stack against a wall, have a bin wall designed for it by your builder or an engineer. The 30x48 is closed on three sides with the front open; the 40x60 is open at both gable ends so a loader or a bale wagon drives straight through.

  3. 03Eave

    A 14' eave for the stack and the tractor.

    Both plans use a 14' eave. The stack height is the eave less the 2 ft kept under the trusses, so a taller eave holds more hay and a lower one holds less; the designer takes 8' to 16' and recounts the tons at each.

  4. 04Snow and wind

    No checked part past 95% of its limit.

    As drawn, each plan is checked for 30 psf of ground snow, 115 mph of wind and a 36 in frost line. The bar is the most any checked member or connection on that plan uses of its limit, and every one stays at 95% or less; past that, the designer moves the purlins closer or goes up a size. The highest here is the 40x60: truss-to-post bolts, wind uplift, 6 x 1/2 in through-bolts, 95%.

    In the designer you enter your own loads, 20 to 70 psf of snow and 105 to 140 mph of wind. Past 30 psf the truss maker designs the trusses for your load; past 115 mph the posts, bracing and uplift need a second look. These are preliminary checks for the loads you entered; local approval is not checked, so ask your building department what it needs.

  5. 05Floor

    Drawn on gravel, with no slab in the total.

    As drawn, the floor is gravel, so there is no slab in the total. Keep hay off bare ground and let water drain away from the walls. The designer can switch the floor to dirt or concrete and prices it. Ask your building department whether a hay barn needs a permit where you build; some places exempt farm buildings and some do not.

Side by side

Both hay barn plans compared.

PlanFloorEaveBaled hayPostsTrussesMaterials, aboutLabor if hired, broad referenceBuild timeChecks
The 30x48 hay barn plan, one of the hay barn plans, drawn by the barn designer30x4830x48 hay barn1,440 sq ft14'about 54 tons177 at 8'$17,600$7,200 to $21,600155 to 230 hPassed, 4 for your builder
The 40x60 hay barn plan, one of the hay barn plans, drawn by the barn designer40x6040x60 hay barn2,400 sq ft14'about 96 tons2211 at 6'$24,400$12,000 to $36,000205 to 305 hPassed, 4 for your builder

Each row is the starting plan as drawn, for 30 psf of ground snow, 115 mph of wind and a 36 in frost line. Materials are rounded: shelf prices plus the estimated trusses and concrete, before sales tax, delivery, labor and site work. Each plan page keeps the shelf prices, the estimate and the exact sum apart. Labor is the published range for hiring it out, a broad reference and not a quote; build time is total labor hours. Passed means the preliminary checks passed for those loads; local approval is not checked.

What they cost

About $17,600 to $24,400 in materials.

Each plan's materials list, priced line by line: shelf prices plus the trusses and the concrete for the post pads, estimated from published ranges. Hired labor is apart and only a broad reference from published price guides, not a quote; the table above has it plan by plan.

Lowest
$17,600, 30x48
Highest
$24,400, 40x60
Per sq ft of floor
$10.15 to $12.19
Labor if hired, broad reference
$7,200 to $36,000

Excluded: sales tax, delivery, permits, site work, engineering and equipment rental

The pole barn cost guide breaks it down by group, and the pole barn cost calculator runs the same numbers for your own size.

Materials for each hay barn plan

The $79 builder's plan

Free to plan. $79 to build from.

Every plan above is free to open, check and price. The builder's plan is drawn from the barn you finish, for one payment. These are real sheets from the 39-sheet plan for the 30x40 pole barn.

Free

  • The design in 3D, and every change you make to it
  • Every preliminary check, with its rule and its source
  • The materials list priced line by line
  • A summary PDF of the design and its checks

$79 once

  • The post layout, every post dimensioned from one corner
  • Every wall framed: girts, headers and openings with heights
  • The truss order sheet to hand the truss maker
  • The roof frame and the steel, panel by panel
  • The cut list, the shopping list with store prices and the build, step by step
Customize the 30x48, free

You check out in the designer, with your design loaded. If the plan has an error, we fix it or refund you within 30 days. Guarantee terms.

Real sheets from the 39-sheet sample plan for the 30x40 pole barn

  • Sample sheet 1 of 39 from the plan for the 30x40 pole barn in our hay barn plans: post layout

    01Post layout

  • Sample sheet 2 of 39 from the plan for the 30x40 pole barn in our hay barn plans: wall framing

    02Wall framing

  • Sample sheet 5 of 39 from the plan for the 30x40 pole barn in our hay barn plans: truss order sheet

    05Truss order sheet

  • Sample sheet 4 of 39 from the plan for the 30x40 pole barn in our hay barn plans: shopping list

    04Shopping list

Sample sheets from the plan for the 30x40 pole barn in our hay barn plans

Questions

Anything else? Write to us or read the questions about all plans.

Questions about hay barn plans

About 250 cubic feet per ton of baled hay. Counting one solid stack kept 2 ft off the walls and under the trusses, the 30x48 hay barn holds about 54 tons and the 40x60 about 96. Rows with air between them hold less.

Not in these plans. The girts and wall posts are sized for wind, not for the side push of stacked bales, so the stack stands free of the walls. If you want to stack against a wall, have a bin wall designed for it by your builder or an engineer.

The materials for our 30x48 hay barn come to about $17,600, before sales tax, delivery, labor and site work: $12,361.55 at shelf prices plus $5,199.00 for the trusses and the post pads, estimated from published ranges, exact sum $17,560.55. Hired labor adds $7,200 to $21,600, a broad reference from published price guides, not a quote; built yourself it is about 155 to 230 labor hours. The pole barn cost guide breaks it down.

Our 30x48 has closed side walls and an open front, and the 40x60 is open at both ends. For a roof on posts with no walls at all, look at the pole shed plans.

Other ways to browse

Not quite the barn you picture?

  • Goat barn plans: The 24x36 goat barn, drawn by the barn designer, shown next to our hay barn layoutsIllustration

    Goat barn plans

    An enclosed barn on a dirt floor, the floor checked per goat.

    2 plans

  • Pole shed plans: A small red pole shed with the front open on a riding mower and stacked firewood, a charcoal steel roof on wood posts, shown next to our hay barn layoutsIllustration

    Pole shed plans

    Open fronts, open carports, lean-tos and big equipment sheds.

    9 plans

  • All free pole barn plans: A red 30x40 style pole barn with a white overhead door on the gable end, a walk door and two windows, shown next to our hay barn layoutsIllustration

    All free pole barn plans

    Every size side by side, with a finder by use and door.

    36 plans

Your loads, your barn

Start from the 30x48. Make it yours.

Change the width, the length, the bays, the eave, the doors and your loads. The post size and depth, the purlins, the headers and the materials list follow every change. Free, no account.

Customize this design, free
Designing
Free
Builder's plan
$79 once
Account
Not needed
Inside a new building like the 30x48 in these hay barn plans: trusses, girts and a workbench, the overhead door open on a fieldIllustration